Lubricut 5000 from Chemtool Inc. is a synthetic metalworking fluid designed for use as a mist or near-dry machining lubricant for cutoff of all metals. The non-water-miscible fluid is suitable for cutting of aluminum billets
and extrusions of cast and regular aluminum alloys, as
well as most nonferrous metals.
With its low-mist properties and VOC value of 4. 7 g/l,
it contributes to environmental compliance and safe
working conditions. The fluid contains no chlorine, phosphorus, boron, or zinc. It includes a nonferrous corrosion
inhibitor.
Chemtool Inc.
815-957-4140
www.chemtool.com
Flux-cored electrode
Select-Arc Inc.
offers a gas-
shielded, flux-
cored electrode
designed for
welding carbon
and certain low-alloy steels in appli-
cations in which excellent mechani-
cal properties are required in both
the as-welded and stress-relieved
conditions.
The 7000-SR is an all-position electrode with a low spatter emission
and fast-freezing slag. Its deep-pen-etrating characteristic helps reduce
lack of fusion.
The electrode maintains good
toughness and low hardness after
long-term stress relief, the company
reports. It is suitable for welding vessels, piping, and other applications
requiring low-temperature toughness before and after stress relieving.
Select-Arc Inc.
800-341-5215
www.select-arc.com
Modular welding table
Strong Hand Tools® has introduced
the new BuildPro™ Max modular
welding table. It provides a continuous tabletop surface of precision-ground steel plates.
The 8- by 4-ft. table is constructed
of precision, hardened steel plates
with 0.625-in. machined holes in a 2-
by 2-in. grid pattern. The company’s
clamps and modular fixturing components can be inserted into any of
the tabletop holes for unlimited options in the setup of welding fixtures.
Each plate can be removed and reconfigured to extend the table width.
Additional plates can be added at either end, or the sides of the tabletop,
to increase table length and width to
accommodate larger projects. The
tables also can be joined together for
oversized fixturing jobs.
The table has a heavy-duty, five-beam support base with a 7,500-lb.
load capacity.
Strong Hand Tools
800-989-5244
www.stronghandtools.com
Synthetic metalworking fluid
Product News
Stop by Booth S1856, FABTECH 2013,
to see a LIVE DEMONSTRATION of
the Barton Abrasive Removal Tool,
November 18-21.
“I can’t say enough good things
about the BART. We run 24/7.
I can’t afford downtime. BART
lets me remove sand from the
tank without shutting down my
waterjet. It’s a walk in the park.”
Lloyd Sharp
Concorde Manufacturing
and Fabrication
Nogales, Arizona
BARTONINTERNATIONAL
USA/Canada 800.741.7756
Phone 518.798.5462
info@barton.com
www.barton.com/BART
BART is a convenient, economical,
and completely portable system
for removing spent waterjet
abrasives from your holding tank –
while your waterjet equipment
keeps running.
See BART Run.
