Fume, dust collector
A new mobile Farr Cart™ fume and
dust collector from Farr Air Pollution
Control provides filtration in welding workshops and industrial settings. The unit extracts moderate
concentrations of smoke and light
dust generated by intermittent
processes such as welding and grinding, delivering 99+ percent efficiency on welding fume.
The mobile cart can be used in
small spaces. It comes ready to use with
no installation required, and the pleated filter can be changed in minutes.
The cart comes with a 10-ft., flexible fume extraction arm and built-in
halogen spotlight in the hood.
Accessories include a HEPA safety filter and spark protection device.
Farr Air Pollution Control | 800-479-6801 |
www.farrapc.com
Patriotic hard hat
North Safety Products
offers the Fibre-Metal
SUPEREIGHT® E- 2
series Spirit of
America hard hat
with a patriotic design.
The company applies a full graphic
process to high-performance hats and
caps to provide a head protection
product unavailable elsewhere,
reports the company. The hard hats
are shipped factory-assembled.
North Safety Products | 888-422-3798 |
www.northsafety.com
Enter code FC374 at www.ffid.net
Enter code FC375 at www.ffid.net
Force monitoring of
clinching, riveting
Kistler offers technology to monitor
force in clinching and riveting
processes, preventing faulty components and thus eliminating manual
rejection of deficient clinched or riveted joints.
The Type 9831C322 calibration
transmitter performs periodic checking of clinching tongs. Their parameters are documented and, if necessary,
adjusted. The calibration transmitter
also can calibrate sensors for indirect
or direct force measurement in the
machine.
This type of permanent monitoring of the clinching force cycle using
piezoelectric measuring technology
not only makes the process cycle
transparent, but also monitors the
long-term stability of the clinching
machine.
Pop or blind riveting also can be
monitored and documented by integrating piezoelectric force sensor
technology and visualization with the
CoMo Net® Type 5863A1 or CoMo
View® Type 5863A2 process monitoring system.
Kistler Instrumente AG | 41-52-224-11-11 |
www.kistler.com
Economy press brakes and shears with
premium KMT Ursviken service equals profit.
KMT Ursviken now offers low priced press brakes and shears that
come with UMV’s extensive customer support. The machines are
set-up and serviced by KMT Ursviken’s engineers and get the
same attention you expect from higher priced machines.
With KMT Ursviken Economy, you get the benefits of a lower
initial investment combined with dependable customer support.
Call to learn more about this exceptional deal: 8 6 6 - 8 7 2 - 4 6 6 8
Fiber laser marking machine
The MeccoMark™ fiber laser marking machine from Mecco provides
direct part marking for traceability,
verification, and identification. It
marks part numbers, 2-D data matrix,
logos, and graphics.
Both 10- and 20-W models are
available. The laser has a lifetime of
30,000+ hours, according to the company. It marks up to 250 characters/
sec. with a repeatability of ±1 part in
4,000.
Mecco Marking & Traceability | 888-369-
9199 | www.mecco.com
The FABRICATOR | An FMA Publication
www.thefabricator.com | March 2007