Straight-side press Turret tooling
SEYI Presses Inc. will demonstrate its 121-ton straight- Mate Precision Tooling
side press that is designed to eliminate angular deflection. has introduced the Ultra
All of the company’s presses are produced in single- Tec® and Ultra XT ultra-
point, multipoint, link-motion, and high-speed models, thick-turret tooling.
with standard capacities from 22 tons to 2,400 tons. Both are interchange-
SEYI Presses Inc. | 909-839-1150 | www.seyiamerica.com able with other tool sys-
tems and include Slug
Free® dies that clear the
punched slug with every
cycle, eliminating slug
pulling, extending tool
life, and improving piece
part quality.
Both styles are available for Amada, Finn-Power, Murata Wiedemann,
Euromac, Nisshinbo, Strippit, and all other punch presses using thick-turret
tooling.
Mate Precision Tooling | 800-328-4492 | www.mate.com
Automated scrap handling systems
Mayfran International will demonstrate its automated scrap handling technologies
that are custom-designed to
remove scrap and trim pieces
from presses, pressrooms, and
entire facilities. The exhibit features illustrations and interactive
videos of large, plantwide systems, each
containing conveyors, stationary and swivel
chutes, platforms, bins, stairs, and control systems for a stamping operation.
The company also will display a section of a heavy-duty conveyor frame, as
well as examples of open-frame and closed-frame designs.
Mayfran International | 440-229-5449 | www.mayfran.com
Waterjet machine
Flow International Corp.’s latest IFB, a waterjet cutting machine with
87,000 PSI and HyperPressure technology, has increased power density and
jet efficiency, 40 percent higher velocity, lower abrasive consumption, and
reduced part taper, according to the company.
Flow International Corp. | 800-446-3569 | www.flowcorp.com
Hydraulic clamps
Serapid Inc.’s TBHS wedge clamp, also referred to as an escaping arc clamp, is a fixed clamp that moves in an arced path to
allow for maximum clamping force. The hydraulic clamp has a
mechanical safety lock so dies won’t drop in the event of a
pressure failure.
The BTSC is a heavy-duty rod clamp that features an adjustable clamping height. It can be fixed
or slid into a press’s T-slots.
Serapid Inc. | 800-663-4514 |
www.serapid.com
Straight-side
servo press
The H2W
series straight-side servo press
from Komatsu
America
Industries LLC
features independent drives
for each slide
connection;
pulse hand wheel control for precision die height control to 0.01 mm;
built-in load monitoring; and a color
touchscreen control.
All Komatsu servo presses have
slide accuracy and repeatability in
microns and fully programmable
slide velocity and dwell for enhanced
throughput and reverse loading control. Capacities range from 35 to
2,500 tons.
Komatsu America Industries LLC |
866-513-5778 | www.komatsuamerica.com
The FABRICATOR | An FMA Publication
March 2007 | www.thefabricator.com