Miniature brushes handle applications from simple to complex
Pferd miniature brushes
for cleaning and light deburring provide repeatable deburring and sur-face-conditioning results
on a variety of materials,
from hard alloys to so;
aluminum. The lineup of
wheel, cup, and end configurations includes stem-mounted
miniature brushes that are suitable for precision applications.
The brushes are available with a selection of filaments,
including carbon steel wire, stainless steel, brass wire, aluminum oxide abrasive filament, and a variety of so; or sti;
All the stem-mounted miniature brushes are mounted
on ;;;-in. stems and are recommended for use with variable-speed die grinders.
Integrated system helps
simplify plasma beveling
ESAB Welding & Cutting has released
SmartBevel™ Technology for accurate
bevel cutting with minimal operator
intervention. It includes beveling data
and geometric compensations necessary to cut V, X, Y, and K bevels on mild
steel from about ¼ to 2 in. thick.
The system integrates all bevel compensations into the CNC to simplify
bevel programming and enable operators to fine-tune the program at the machine. The part program or nest represents the actual desired part geometry,
without bevel compensations. This
eliminates the need for trial-and-error
The system integrates plasma, CNC,
so;ware, height control, bevel head,
and gantry functions. It automates
programming steps by incorporating
best-practice bevel cut sequences into
ESAB’s Columbus III CAD/CAM programming and nesting so;ware.
ESAB Welding & Cutting Products
Metal spinning machines
produce aircra; engine
MJC Eng. has
producing lip skins for aircra; engine
housings. The machines use Siemens
CNC and robotic handling technology,
as well as a proprietary servo pump-controlled Green Power™ hydraulic
The units are used to spin form pro-duction-run components out-of-round
by 8;;; to 9 in. in aluminum alloy blanks
measuring up to 270 in. dia. and ;;; in.
thick. They hold tight tolerances that
are verified by thermo-imaging cameras and fed back by the CNC for accuracy
tracking. A heating torch is integrated
for in-process adjustments.
MJC Eng. & Technology Inc.
in the USA
Kalamazoo Metal Muncher
Web Site: www.kalamazoometalmuncher.com
Punch, Flat Bar Shear,
Angle Shear, Cope, Notch,
or Drill We Can Do It All
5-Station Fabrication Center...
Featuring two-cylinder/two person operation,
allowing the punch and shear end to be operated
independently and simultaneously at full capacity.
• Punch Press • Flat Bar Shear • Plate Shear
• Coper/Notcher• Angle Shear
• Round & Square Shear (Optional)
• Standard models 45 tons to 135 tons
GB Hydraulic Punch Press...
The GB series is ideal as a dedicated punch
press, but easily accepts a wide range of
standard accessories and special tooling to
allow shearing or forming.
Heavy-Duty 20" Drill Presses...
• Heavy-Duty Cast Iron Construction
• Mechanical Variable Speed
• 2 Speed Range Models Available
• Drilling Capacity Up-to 1-1/4"
See us at FAB TECH Booth A3052
All brands, all manufacturers will be considered for trade in / trade up
3.375x4.875 GB, MM & Drill Gen Ad_Layout 1 2/9/17 2: 40 PM Page 1
NOV. 6-9 | MCCORMICK PLACE
YOUR KEY TO
Check out what we will be bringing with us!
CUTTING FORMING SHEARING COMPACTING ADDITIVE
3D PRINTED SHELBY COBRA
on Display at Registration
DON’ T FORGE T TO
ASK ABOUT YOUR KEY!
See one of our staff to get your
own laser cut/3D printed key