Steel pipe production machinery
is custom designed
Cagil Makina produces tailor-made,
pipe and ERW steel
pipe mills. The
company can design and manufacture complete production mills to produce
pipe profiles for gas and water line applications.
Options include a coil handling system with pretensioning
system and uncoiling with peeler; a flattening system with
five or seven rolls; a strip end joining system with end milling
and 10 or 15 min. from start to stop; edge milling units, including 17.72- or 23.62-in. cutter heads; main drives with feeding
forces of 66, 110, 154, or 187 tons; two- or three-roll edge prebender; and forming unit with 176, 374, 495, or 660 tons.
Flap discs go from rough
grinding to smooth finishing
in one step
POLIFAN®-Curve flap discs from Pferd
Inc. are designed for rough and finish
grinding in fillet weld applications. The
patented, proprietary design goes from
rough grinding to smooth finishing in
a single step. The tool removes weld
seams and slag, leaving a finish smooth
enough for identification of cracks, inclusions, and porosity in the fillet during weld inspections, says the company.
This disc’s configuration offers three
usable working surfaces—the top face,
bottom face, and entire radial edge—as
opposed to the single surface of a conventional flap disc. This allows the disc
to grind fillet welds as well as unusual
The discs are available in a number
of diameters ( 4½, 5, 6, and 7 in.) and
abrasives (zirconia, aluminum oxide for
aluminum, and ceramic oxide) and with
7⁄8-in. arbor hole or quick-change
offers 1,000 hours of
salt spray resistance
Cortec® Laboratories has introduced
EcoShield® 386 water-based coating.
Using Nano VpCI® coatings chemistry,
the coating can withstand a minimum
1,000 hours of intense salt spray at 1 mil
dry film thickness.
A thin, high-gloss clear coat of the
product protects metal structures in extremely harsh outdoor conditions while
allowing visual inspection of the substrate. It provides long-term corrosion
protection as well as UV protection.
See Us At