steel clamping levers
J.W. Winco Inc. offers GN 927.7 stainless steel clamping levers with eccentrical cam with stainless steel contact
plate, tapped type, in inch and metric
sizes. The levers are offered in Type A
with adjustable contact plate or Type
B with fixed contact plate.
The RoHS-compliant clamping levers are used for rapid clamping and
releasing operations. They permit
torque-free clamping via a combined
downward vertical and cam-actuated
motion. Designed to ensure that their
movement cannot exceed the maximum clamping position, they deliver
thrust forces of up to 8 kN.
With the Type A version, the distance between the eccentrical cam
and the contact surface is adjustable
by means of a fine-threaded knurled
nut. This permits the maximum
clamping force to be set by a simple
adjustment. In addition, this also permits the selection of a preferred lever
position in relation to the clamping
J. W. Winco
Portable weld defect kit
Realityworks Inc. has introduced the
RealCareer® Welding Solutions Weld
Defects Kit for welding educators and
trainers. The portable, lightweight kit
contains 13 plastic, true-to-life models of common defects that can occur
Educators can use the kit to inspect welds and instruct welding students on how to identify and correct
common defects and discontinuities.
Students can use it to understand
how weld defects occur and how
to address them by correcting both
their machine and their technique.
The kit includes an instructor
guide, welding posters, welding defect flashcards, and comprehensive
curriculum with training lessons covering welding safety, types, applications, and testing.
Welding power sources
Miller Electric Mfg. Co. has released
two welding machines that deliver
up to 210 amps of output power for
GTAW and SMAW.
Replacing the Dynasty 200 model,
the Dynasty® 210 AC/DC power source
welds up to 0.25-in. steel and aluminum in a single pass.
The Maxstar® 210 DC power source replaces the Maxstar
200 model, welding up to 0.25-in. steel in a single pass. Each
stand-alone, portable power source weighs 50 lbs. or less.
The Maxstar STR base model features digital meters and
dual welding memories. The Dynasty DX base model offers full AC features, including advanced waveforms. Both
include a front-panel memory card data port, allowing for
the download of software updates from the manufacturer
and the purchase of product feature expansions.
Miller Electric Mfg. Co.
Productivity increases of 15-30% are being realized with the revolutionary WELDPRO 360. Not your Grandfather’s weld boom–this is a modern state-of-the-art welding center. Every tool the weld operator needs is placed at their fingertips. With the flip of a switch, this double-articulated boom rotates into position, anywhere within a 56 ft. diameter weld zone. Unlimited rotation around the center-support column, along with a secondary boom arm that pivots back towards the center column–in either direction, delivers total coverage of the welding zone. No dead spots. No cables to drag. No wasted motion. Arc on-time soars. If you are looking to slash your welding costs in a significant way, then you’re ready for the revolutionary WELDPRO 360 welding center. Let us show you how you can take control of weld productivity, improve product quality, and enhance operator safety with a WELDPRO 360 welding center. See us at Fabtech in Chicago, November 2015, Booth N21055 www.weldpro360.com Andersen Industries, Inc. - 17079 Muskrat Ave, Adelanto, CA 92301 USA Ph. 760.246.8766
WELDPRO 360 Slashes Non-Arc Time
Andersen-WP360-TF10_Layout 1 8/21/2015 9: 13 AM Page 1