Extension die grinders extend
into previously inaccessible areas
Dynabrade Inc. has introduced a new line of 0.4-HP extension die grinders. The
air tools allow for work within long pipes, castings, and other places where an
extended reach is needed.
The straight-line air tools are available in either a front- or rear-exhaust air
motor and run at 25,000 RPM. They are available in 3-in. and 6-in. extension
Each grinder features a safety-lock lever to prevent accidental tool startup.
Running as low as 72 dBA, the grinder powers optional carbide burrs and
mounted points for deburring, grinding, etching, and cleaning.
8989 Sheridan Drive
Clarence, NY 14031
Parting tool offers long grind life
Wilson Tool International® offers the Dura-
Die parting tool. Its replaceable die inserts
are made from the company’s Ultima tool
steel, which offers high wear resistance for
long grind life. The die base is made from
shock-resistant steel, allowing it
to withstand high punching force.
Fabricators can combine the
parting tool with the manufacturer’s Dura-Blade product to
help increase the life of the parting tool. When a new die is necessary, the removable insert can be
replaced with minimal downtime,
says the company.
The tool is available for standard parting in C, D, and E stations (close-to-clamp is available
in D and E stations). It comes with
positive and SlugHugger2 relief
Wilson Tool International
12912 Farnham Ave.
White Bear Lake, MN 55110
Cordless grinders fit in compact spaces
Suhner Industrial Products has introduced four cordless, compact grinders.
Each grinder features an electric motor and an 18-V battery pack with a total
capacity of 4 Ah. A detachable particle guard protects the motor from coarse
The ASC 9 straight grinder is suitable for work with nonwoven brushes and
flap wheels. Typical work includes the removal of tarnishing and blending on
matte surfaces. The ABC 7 cordless belt grinder is designed for use in tight
spaces, such as fillet welds or miters. The machine offers extremely fast belt
changes for grinding or polishing applications, says the company.
The AKC 3 battery fillet weld grinder is made for metalworking, with reduction gears that make it very powerful. It has a lightweight design and long
neck for maneuverability and use in tight places.
The ATC 7 tube polisher is designed for tubes up to 1.75 in. dia. It offers a
wraparound angle of at least 180 degrees that is not maintained by the contact
Suhner Industrial Products LLC
43 Anderson Road
Rome, GA 30162
GMA GARNET GROUP
when your abrasive matters!
Tetracore Fabricator 1/2 page ads.HORIZON Ads.2015.OUTLINES.indd 1 9/9/15 3: 41 PM